User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 60
Repeat Step 4 to set schedules for other channels. If the settings can also be used for other channels,
click Copy, and then choose the channel you want to copy to.
5. Click Apply in the Record Schedule interface to save the settings.
5.3 Configuring Motion Detection Recording
Purpose
Follow the steps to set the motion detection parameters. In live view mode, once a motion detection
event occurs, the DVR analyzes it and performs action(s) to handle it. Enabling the motion detection
function can trigger certain channels to start recording, trigger full screen monitoring, broadcast an audio
warning, notify the surveillance center, send e-mail, etc.
1. Go to Menu > Recording Configuration > Motion Detect.
2. Configure Motion Detection.
1) Choose the camera you want to configure.
2) Check Enable Motion Detection.
3) Check False Alarm Filter. Refer to
8.2 Setting PIR Camera Alarm for details.
4) Use the mouse to drag and draw the area for motion detection. To set the motion detection for the
entire area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.
Figure 5-13 Motion Detection - Mask
5) Click
, and the message box for channel information pops up.