User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 53
Figure 5-3 Record Parameters
2. Set the recording parameters.
1) Select the Record tab to configure.
2) Select a camera from the camera drop-down list.
3) View the Camera Resolution.
When TurboHD, AHD, or HD-CVI input is connected, you can view information including input signal
type, resolution, and frame rate (e.g., 1080P30). When CVBS input is connected, you can view
information such as NTSC or PAL.
4) Configure the following parameters for the Main Stream (Continuous) and the Main Stream (Event).
• S
tream Type: Set the stream type to be Video or Video & Audio.
• Resolution: Set recording resolution.
Analog signal inputs (TurboHD, AHD, HD-CVI, CVBS) and IP signal input can be recognized and
connected automatically.
If the configured encoding resolution conflicts with the front-end camera resolution, the encoding
parameters will adjust automatically to match the front-end camera. E.g., if the resolution of the
front-end camera is 720p, the main stream encoding resolution will adjust to 720p automatically.
• Bitrate Type: Set the bitrate type to be Variable or Constant.
• V
ideo Quality: Set the video quality of recording, with six levels configurable.
Stream Type, Resolution, Bitrate Type, and Video Quality are not configurable for the IP Camera Main
Stream (Event).