User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 52
Chapter 5 Recording and Capture Settings
5.1 Configuring Encoding Parameters
Before You Start
1. Make sure that the HDD has already been installed. If not, install and initialize an HDD, (Menu > System
Configuration > HDD > HDD Information).
Figure 5-1 HDD Information
2. Click the Advanced tab to check the storage mode of the HDD. (Menu > System Configuration > HDD >
Storage Mode)
1) If the HDD mode is Quota, set the maximum record capacity. See
12.4 Configuring Quota Mode
.
2) If the HDD mode is Group, you must set the HDD group. See
5.9 Configuring HDD Group
.
Figure 5-2 HDD - Storage Mode
Setting Parameters
1. Go to Menu > Recording Configuration > Record Quality > Record.