User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 49
The speed dome starts linear scan from the left limit to the right limit, and you must set the left limit
to the left side of the right limit. Also, the angle from the left limit to the right limit should be no more
than 180º.
4.2.8 Calling Linear Scan
Purpose
Follow the procedure to call the linear scan in the predefined scan range.
1. Click PTZ in the lower-right corner of the PTZ Settings interface, or press PTZ on the front panel, or click
the PTZ Control icon
in the quick setting bar to enter the PTZ setting menu in live view mode.
2. Click the One-touch tab to show the one-touch function of the PTZ control.
Figure 4-12 PTZ Panel – One-touch
3. Click Linear Scan to start the linear scan and click Linear Scan again to stop it.
4. You can click Restore to clear the defined left limit and right limit data. The dome needs to reboot to
for settings to take effect.
4.2.9 One-Touch Park
Purpose
Configure settings to start a predefined park action (scan, preset, patrol, etc.) automatically after a period
of inactivity (park time).
1. Click PTZ in the lower-right corner of the PTZ Settings interface, or press PTZ on the front panel, or click
the PTZ Control icon in the quick setting bar to enter the PTZ setting menu in live view mode.
2. Click the One-touch tab to show the one-touch function of the PTZ control.