User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 45
Figure 4-6 PTZ Settings
2. Select patrol no. in the drop-down patrols list.
3. Click Set to add key points for the patrol.
Figure 4-7 KeyPoint Configuration
4. Configure key point parameters such as key point no., key point stay duration, and patrol speed. The
key point corresponds to the preset. KeyPoint No. determines the order in which the PTZ will follow
while cycling through the patrol. Duration refers to the time interval to stay at the corresponding key
point. Speed defines the speed at which the PTZ will move from one key point to the next.
5. Click Add to add the next key point to the patrol, or click OK to save the key point to the patrol.
You can delete all the key points by clicking Clear for the selected patrol, or click Clear All to delete all
key points for all patrols.