User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 44
4.2.2 Calling Presets
Purpose
A preset enables the camera to point to a specified position such as a window when an event takes place.
1. Click PTZ in the lower-right corner of the PTZ setting interface or press the PTZ button on the front
panel or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the
right-click menu to show the PTZ control panel.
2. Choose Camera in the drop-down list.
3. Click the General tab to show the general settings of the PTZ control.
Figure 4-5 PTZ Panel-General
4. Click to enter the preset no. in the corresponding text field.
5. Click Call Preset to call it.
When the connected Hikvision-C camera/dome’s PTZ protocol is set to UTC (Hikvision-C), call the
preset 95 to enter the connected Hikvision-C camera/dome menu. Use the directional buttons on the
PTZ control panel to operate the menu.
4.2.3 Customizing Patrols
Purpose
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before
moving on to the next key point. The key points are corresponding to the presets. The presets can be set
following the steps above in Customizing Presets .
1. Go to Menu > Cameras Setup > PTZ.