User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 42
Figure 4-2 PTZ-Parameter Settings
4. Select the PTZ camera parameters from the drop-down list.
All the parameters should be exactly the same as the PTZ camera parameters.
For a connected Hikvision-C camera/dome, you can set the PTZ protocol to UTC. Make sure the
protocol selected here is supported by the connected camera/dome.
When UTC protocol is selected, all other parameters such as baud rate, data bit, stop bit, parity, and
flow control are not configurable.
When a Hikvision CVBS camera is connected, you can control PTZ via UTC.
5. (Optional) Click Copy to copy the settings to the other channels. Select the channels you want to copy
to and click OK to return to the PTZ Parameters Settings interface.
Figure 4-3 Copy to Other Channels
6. Click OK to save the settings.