User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 35
Figure 3-4 Image Settings
Face Detection can be enabled if you click the icon. The dialog pops up as shown in Figure 3-6. Click
Yes and the full-screen live view of the channel is enabled. Click to exit from the full-screen mode.
Figure 3-5 Enable Face Detection
You can configure face detection only when it is supported by the connected camera.
Move the mouse onto the Information icon to show the real-time stream information, including the
frame rate, bit rate, resolution and stream type.
Figure 3-6 Information
When an H.264 IP camera is connected, the stream type is displayed as H.264. When an IP camera
supporting H.264+ is connected, the stream type is displayed as H.264+. When an IP camera
supporting H.265 is connected, the stream type is displayed as H.265. When an IP camera supporting
H.265+ is connected, the stream type is displayed as H.265+.
For analog cameras supporting VCA, click the icon to show the VCA information. Then the
configured line or quadrilateral in the VCA configuration and target frame(s) will be shown on the live view.
Click the icon again to hide the VCA information.