User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 33
Table 1-8 Priorities of Outputs in Independent Output Mode
S.N HDMI VGA CVBS Main Output Auxiliary Output For Live View Output Only
1 √ √ √ or × HDMI VGA CVBS
2 √ or × × √ or × HDMI CVBS VGA
3 × √ √ or × VGA CVBS HDMI
√ means the interface is in use, × means the interface is out of use or the connection is invalid. HDMI,
VGA, and CVBS can be used at the same time.
3.2.1 Using the Mouse in Live View
Table 1-9
Mouse Operation in Live View
Figure 3-1 Right-Click Menu
Name
Description
Menu
Enter the main menu of the system by right clicking the mouse.
Single Screen
Switch to the single full screen by choosing channel number from the drop
-
down list.
Multi
-
Screen
Adjust the screen layout by selecting from the
drop
-
down list.
Previous Screen
Switch to the previous screen.
Next Screen
Switch to the next screen.
Start/Stop
Auto-Switch
Enable/disable the auto
-
switch of the screens.
The
dwell time
of the live view configuration must be set before using
Start
Auto
-
Switch
.
Start Recording
Start recording of all channels, Continuous Record and Motion Detection Record are selectable
from the drop
-
down list.
Add IP Camera
A shortcut to enter the IP camera management interface.(For HDVR series only)
Playback
Ent
er the playback interface and start playing back the video of the selected channel
immediately.
PTZ Control
A shortcut to enter the PTZ control interface of the selected camera.
Output Mode
Output Mode is configurable with Standard, Bright, Gentle and Vi
vid options.
Aux Monitor
Switch to the auxiliary output mode and the operation for the main output is disabled.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is
disabled. You need to switch back to the Main output with the F1 button on front panel or
VOIP/MON
button on IR remote control and then press
Enter
.