User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 29
Table 1-6 Explanation of the Icons
Icon
Explanation
Icon
Expla
nation
Edit basic parameters of the camera
Add the detected IP camera.
The camera is disconnected;
y
ou can click
the icon to get the exception information of
camera.
Delete the IP camera
Play the live video of the connected
camera.
Advanced settings of the camera.
Upgrade the connected IP camera. Security
Show
s
the security status of the
camera to be active/inactive or the
password strength
(strong/medium/weak/risk
y
)
4. (Optional) Check the Enable H.265 checkbox (For Initial Access) for the connected IP camera
supporting H.265. Then, the IP camera will be encoded with H.265.
2.7.3 Editing the Connected IP Camera
Purpose
After adding the IP cameras, the basic camera information is listed on the interface, and you can
configure the basic IP camera settings.
1. Click the icon to edit the parameters. You can edit the IP address, protocol, and other parameters.
Figure 2-28 Edit IP Camera
Channel Port: If the connected device is an encoding device with multiple channels, choose the
channel to connect by selecting the channel port no. in the drop-down list.
1. Click OK to save the settings and exit from the editing interface.
2. Drag the horizontal scroll bar to the far right and click the icon to edit the advanced parameters.