User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 27
STRONG PASSWORD RECOMMENDED – We highly recommend that you create a strong password of your
own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password monthly or weekly can better protect
your product.
4. Click OK to finish activating the IP camera. The camera security status will change to Active.
2.7.2 Adding an Online IP Camera
Purpose
Before you can get a live view or record the video, add the IP cameras to the connection list of the device.
Before You Start
Ensure the network connection is valid. See Chapter 11 Network Settings.


 OPTION 1:
1. Select Add IP Camera from the right-click menu in live view or go to Menu> Camera> IP Camera.
Figure 2-25 IP Camera Management Interface
2. Online cameras in the same network segment will be detected and displayed in the camera list.
3. Select an IP camera from the list and click to add the camera (with the same admin password
as the DVR), or click One-touch Adding to add all cameras (with same admin password) on the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the
admin password of the camera is the same with the DVR’s.
4. (Optional) Check the Enable H.265 checkbox (For Initial Access) for the connected IP camera
supporting H.265. Then, the IP camera will be encoded with H.265.
5. (For encoders with multiple channels only) check the checkbox of Channel Port in the pop-up
window, as shown in the following figure, and click OK to add multiple channels.