User Manual

DS-720xHTI-Kx DVR User Manual
152
Figure 12-9 Local HDD Settings Interface
7. Select the Group number for the current HDD.
The default group no. for each HDD is 1.
8. Click OK to confirm the settings.
Figure 12-10 Confirm HDD Group Settings
9. In the pop-up Attention box, click Yes to finish the settings.
12.3.2 Setting HDD Property
Purpose
T
he HDD property can be set to redundancy, read-only, or read/write (R/W). Before setting the HDD
property, set the storage mode to Group (refer to step1-4 of 12.3.1 Setting HDD Groups ).
An HDD can be set to read-only to prevent important recorded files from being overwritten when the HDD
becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the redundancy HDD
and the R/W HDD simultaneously so as to ensure high security and reliability of video data.
1. Go to Menu > System Configuration > HDD > HDD Information.
2. Highlight an HDD on the list and click the icon to enter the Local HDD Settings interface.