User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 143
Before You Start
Make sure you configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, and the Preferred DNS Server
in the Network Settings menu. Refer to 11.1 Configuring General Settings for detailed information.
1. Go to Menu > System Configuration > Network > Email.
2. Select the Email tab to enter the Email Settings interface.
Figure 11-17 Email Settings Interface
3. Configure the following e-mail settings:
• Enable Server Authentication (optional): Check the checkbox to enable the server authentication
feature.
• User Name: The user account of sender’s e-mail for SMTP server authentication
• Password: The password of sender’s e-mail for SMTP server authentication
• SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com)
• SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
• Enable SSL (optional): Click the checkbox to enable SSL if required by the SMTP server.
• Sender: The name of the sender
• Sender’s Address: The e-mail address of the sender
• Select Receivers: Select the receiver. Up to three receivers can be configured.
• Receiver: The name of the receiver of the e-mail
• Receiver’s Address: The e-mail address of the receiver
• Enable Attached Picture: Check the checkbox if you want to send e-mail with attached alarm
images. The interval is the time between two captures of the alarm images.
For IP cameras, alarm images are sent directly as attached pictures by e-mail. Up to one picture can
be sent for one IP camera. The attached pictures of linked cameras cannot be sent.