User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 140
2) Click Apply to save the settings.
3) Click Refresh to get the latest status of the port mapping.
11.2.5 Configuring More Settings
1. Go to Menu > System Configuration > Network > More Settings.
Figure 11-13 More Settings Interface
2. Configure the remote alarm host, server port, HTTP port, multicast, and RTSP port.
• Alarm Host IP/Port: With a remote alarm host configured, the device will send the alarm event or
exception message to the host when an alarm is triggered. The remote alarm host must have the
CMS (Client Management System) software installed.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client Management
System) software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be the same as the
alarm monitoring port configured in the software (default port is 7200).
• Multicast IP: The multicast can be configured to realize live view for more than the maximum
number of cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0
to 239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to
239.255.255.255.
When adding a device to the CMS (Client Management System) software, the multicast address
must be the same as the device’s multicast IP.
• RTSP Port: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use
in entertainment and communications systems to control streaming media servers.
Enter the RTSP port in the RTSP Port text field. The default RTSP port is 554, and you can change it
according to different requirements.
• Server Port and HTTP Port: Enter the Server Port and HTTP Port in the text fields. The default Server
Port is 8000, and the HTTP Port is 80. You can change them according to different requirements.
Set the Server Port in the range of 2000-65535. It is used for remote client software access. The HTTP
port is used for remote IE access.