User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 139
Figure 11-11 UPnP™ Settings Interface
2. Check Enable UPnP checkbox to enable UPnP™.
3. Set the Mapping Type as Manual or Auto in the drop-down list.
OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router
automatically.
1) Click Apply to save the settings.
2) Click Refresh to get the latest status of the port mapping.
OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port on demand by clicking
to
activate the External Port Settings dialog box.
1) Click to activate the External Port Settings dialog box. Configure the external port no. for server
port, http port, and RTSP port respectively.
You can use the default port no., or change it according to actual requirements.
External Port indicates the port no. for port mapping in the router.
The value of the RTSP port no. should be 554 or between 1024 and 65535, while the value of the other
ports should be between 1 and 65535, and the values must be different from each other. If multiple
devices are configured for the UPnP™ settings under the same router, the value of the port no. for
each device should be unique.
Figure 11-12 External Port Settings Dialog Box