User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 99
6. Click Linkage Action tab to set up motion alarm response actions (refer to 8.8 Setting Alarm Response
Actions).
Figure 8-4 Set Motion Detection Linkage Action
7. Repeat the above steps to set up arming schedule for other days of the week.
8. Click OK to complete the channel motion detection settings.
9. To set motion detection for another channel, repeat the above steps or copy the above settings to it.
You are not allowed to copy the “Trigger Channel” action.
8.2 Setting PIR Camera Alarm
Purpose
DVR can receive the PIR (Passive Infrared) alarm of the analog cameras supporting the function via coaxial
communication. You can enable the false alarm filter for the motion detection of the PIR cameras. Then,
the motion detection alarm will be triggered only when the motion detection event and PIR event are both
triggered, and the alarm indicator will light on for the PIR cameras supporting enabling alarm indicator.
Before You Start
Connect the PIR camera to the DVR. Configure White Light as Alarm and Trigger Mode as DVR for the camera
OSD.
1. Go to Menu > Recording Configuration > Motion Detect.