Quick Start Guide

Rev. 010918NA
6 A C C E S S I N G B Y W E B B R O W S E R ( c o n t i n u e d )
1.
Open
a W
eb browser,
enter
the
device’s
IP
address, and then press Enter.
2. Log in to the device.
• If the device has not been activated, you
need to activate the device first by setting
the password for the admin user account.
• If the device is already activated, enter
the user name and password in the login
interface, and click Login.
3. Install the plug-in before viewing the live
video and managing the camera. Follow the
prompts to install the plug-in.
You might have to close the Web
browser to finish installing the plug-in.
After login, you can operate and
configure the device, including live
view, playback, log search,
configuration, etc.
Figure 1-22 Activate the Device
Figure 1-23 Login