User Manual

Network Video Recorder User Manual
22
Add Network Camera Manually
Before You Start
● Ensure your network camera is on the same network segment with your video recorder.
● Ensure the network connection is valid and correct.
● Ensure the network camera is activated.
Steps
1. Go to Configuration → Camera → IP Camera.
2. Click in Added Device List.
3. Set network camera parameters, including IP address, protocol, management port, etc. You can
check Use Camera Activation Password to use the device password to add network camera(s).
4. Optional: Click Add More to add another network camera.
5. Click OK.
Figure 5-8 Add Network Camera