Configuration Guide

5 iDS-9632NXI-I8/4F

5) For face capture camera, the face detection can’t be enabled and the NVR will receive the face

image captured by camera by default.

6) NVR can capture face for the IPC whose resolution is lower than 4MP.

2.3 Configure face comparison

Go to NVR’s local GUI, System—Event—Smart Event—Human Face Comparison, tick ‘Enable Face

Picture Comparison’ and select libraries that you want to compare with. Then set a value of

similarity for each library. Now there are two alarm modes: Face Picture Comparison and Stranger.

When the Face Picture Comparison mode is selected, only when the similarity between capture

face and face in library is higher than the Similarity you set, the Human Face Comparison alarm

will be triggered. When the Stranger mode is selected, only when the similarity between capture

face and face in library is lower than the Similarity you set, the Stranger alarm will be triggered.

Face Picture Comparison Mode