User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
89
FAQ 7.2
Why cannot ping the decoder?
Check the cable and the switch. −
Please refer to Chapter 3 to configure the IP address of the decoder. −
Why cannot connect the decoder with client software?
Check the decoder IP address. −
Cable is connected. −
User name and password of decoder are correct. −
Why cannot play back the record files in DVR with decoder?
Check the DVR network connection. −
Check the parameters of the playback file. −
Check if there are files existed in the selected time duration. −
Why cannot decode the stream transported by stream media server?
Check the network connection between decoder and stream media server. −
Check if the stream media server port is connected with the port added on decoder. −