User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
83
Select one Key for activation. 4 keys can be selected. Input the key and you can check the Step 7
checkbox of Display Password to show the clear-text password.
8 to 63 ASCII characters or 8 to 64 hexadecimal characters are allowed.
Click Save on the Wi-Fi Settings interface to save the settings. Step 8
If wired network cable is connected to the device when the Wi-Fi is enabled, wired network
will be connected by priority. But the decoding capability will conform to the configuration in
the Wi-Fi mode.
In Wi-Fi mode, up to 16 channels can be decoded with up to 1080p resolution of each channel
and the maximum bandwidth is 64 Mbps.