User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
2
Remotely controls DVR’s or DVS’s PTZ via transparent channel.
Two-way audio.
Supports multi-screen control with PC installed with RSC server.
Supports Wi-Fi module access to display the signal from IOS/Android mobile phone or pad on
video wall.
Wi-Fi can be enabled via the Web browser or client software. You can get stream and decode
the video on the video wall when Wi-Fi is enabled if no wired network can be accessed.
Configurable LED width and height parameters when the LED is connected.
Regular and irregular virtual screen configurable to display multiple signal sources and get rid of
the restriction of physical screen.
LCD output type configurable for the BNC and VGA outputs; LCD and LED output types
configurable for HDMI outputs.
You can configure what the video wall show when decoding ends and streaming fails via the
Web browser and client software.
Auto-switch of sub-stream configurable via the Web browser and client software.
Integrated Capability
Decoding video/audio stream accessed by ONIVF, RTP/RTSP protocols.
Provides complete software development kit (SDK) for third-party developers.
Port link aggregation technology (Ethernet Channel).
Maintenance Management
Remotely get, configure, export and import parameters.
Remotely reboot, restore default settings and upgrading via web browser or client software.