User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
80
Configure the System parameters, Network parameters and Event parameters on the Step 2
Remote Configuration interface.
Configuring Port Aggregation 5.6.1
Purpose
The Port Aggregation (Ethernet Channel) is port link aggregation technology or port-channel
architecture used for the connection between the switches.
Click Remote Configuration > Network > Port Aggregation to enter the Port Aggregation Step 1
Settings interface.
Select a link number from the list. Step 2
Check the checkbox to select the network interfaces to form a channel-group link, which can Step 3
effectively enhance the link transmission bandwidth.
Port Aggregation Settings Figure 5-59