User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
76
Remote Screen Control via RSC Server 5.5.2
Enter the Video Wall interface and click in the Camera list area, or click on Step 1
Device Management interface to add the RSC server.
Add RSC Server Figure 5-49
Enter the parameters to add the RSC server. Please refer to Chapter 0
Adding an Encoding/Decoding Device to add the RSC server. Step 2
The default user name is admin and the server password is 12345 and we highly recommend you
to change the default password to avoid the security problem.
The successfully added RSC server is listed in the camera list. Step 3
Added RSC Server Figure 5-50
On the camera list, drag the RSC server to the video output window. Step 4