User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
59
After enabling decoding and displaying, the video from the encoding devices can be displayed on
the video wall. And the real-time live view is shown on the physical video wall.
Decoding and Displaying Video 5.3.1
Enter the Video Wall interface. Step 1
Video Wall Interface Figure 5-24
Click Scene to expand the scene interface. You can click to add a new scene, click to Step 2
edit the name for the scene, click to delete the scene and click to save the scene.
Up to 8 scenes can be added.
Scene List Figure 5-25
Drag the camera from the left side camera list to the display window of video wall. The video Step 3
stream from the camera will be decoded and displayed on the video wall.
You can also select a decoding window and then double click a camera to decode and display
the video. You can also hold the Ctrl or Shift key to select multiple cameras and then drag
them to the video wall.