User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
57
Configure Virtual Screen Figure 5-20
Select the window(s) you want to add virtual screen. Step 4
You cannot add virtual screen across the LCD and LED areas.
Click Add Virtual Screen to enter Configure Virtual Screen interface. Step 5
1. Select a virtual screen mode from and input the row and
column number.
For the mode, the row number ranges from 1 to 16 and column number ranges from 1 to 20.
For modes such as , the row number ranges from 2 to 16 and the column number
ranges from 2 to 20. For modes such as , the row number ranges from 2 to 16 and the
column number ranges from 3 to 20.
Configure Virtual Screen Figure 5-21
2. Input the Left Crop Pixel, Top Crop Pixel, Right Crop Pixel and Bottom Crop Pixel in the
corresponding text fields.