User Manual

HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
56
Select Blank Screen or Last Frame when decoding ends. If you select Blank Screen, the Step 3
screen will change blank when the decoding ends. If you select Last Frame, the screen will
show the last frame when the decoding ends.
Select No Signal or Last Frame when streaming fails. If you select No Signal, there shows no Step 4
signal when streaming fails. If you select Last Frame, the screen will show the last frame
when streaming fails.
Set the sub-stream switch. Check the checkbox of Enable Auto-Switch to enable auto-switch Step 5
of sub-stream.
Select the LED Window Display Mode. Normal and Tiled are selectable. Step 6
Click OK to save the settings. Step 7
Configuring Virtual Screen 5.2.4
Purpose:
Video wall layout is restricted by the physical screen and in practice, one physical screen usually
displays more than one signal source. Virtual screen layout allows one physical screen to display
multiple signal sources and get rid of the restriction of physical screen.
On the Video Wall interface, click and select Modify Video Wall to enter the Modify Step 1
Video Wall interface.
Modify Video Wall Figure 5-19
Select the output area for adding virtual screen. Step 2
Click Virtual Screen Config to expand the Virtual Screen Configuration menu. Step 3