User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
55
Batch Configuration Figure 5-16
Click OK to save the settings. Step 4
You can also modify the LED resolution by selecting the LED area and click LED Resolution
Config to input the LED Resolution in the text fields.
Configure LED Resolution Figure 5-17
Configuring General Parameters of Video Wall 5.2.3
Purpose
You can configure what the screen show when decoding ends and streaming fails, enable auto-
switch of sub-stream, and set the LED window display mode on the Add/Modify Video Wall
interface.
On the Add/Modify Video Wall interface, select the added decoder and click to enter the Step 1
General Parameters Configuration of Video Wall interface.
General Parameters Configuration of Video Wall Figure 5-18
Input the Transparency (0 to 100 available) to set the transparency of the video wall. Step 2