User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
54
Edit HDMI Output Figure 5-14
Select the Output Type and set the corresponding parameters. You can select LCD and LED. Step 2
LCD
1. Select the Output Type to LCD.
2. Select the Output Resolution from the dropdown list.
LED
1. Select the Output Type to LED.
2. Select the Output Resolution from the dropdown list.
3. Input the Width × Height in the corresponding text fields.
Set LED Resolution Figure 5-15
The value of LED width and height cannot exceed the output resolution you select.
The supported min. value of LED width × height of HDMI output is 288 × 288 and the max.
value is 1920 × 1080.
Check the checkbox of Batch Configuration to set the same configuration for other outputs Step 3
with same signal source.