User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
44
Click Open Window via Coordinate to enter the interface below. Step 2
Open Window via Coordinate Figure 4-62
Input the Left Margin, Right Margin, Width and Height in the corresponding text fields. Step 3
Click OK to save the settings and the opened window will be displayed on the video wall. Step 4
Switching Encoding Channel 4.4.5
Purpose
You can switch the encoding channel to display on the selected decoding window.
Select a decoding window and select an encoding channel from the left side list. Step 1
Click Switch Channel from the right-click menu to switch the selected channel to the Step 2
decoding window.
Right-Click Menu Figure 4-63
Configuring Auto-Switch of Cameras 4.4.6
Purpose
You can enable auto-switch of the added cameras in one area.
Select a camera area and click Start Auto-Switch from the right-click menu. Step 1
Right-Click Menu Figure 4-64
On the Start Auto-Switch interface, input the Interval for auto-switch. Step 2