User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
31
Setting Video Wall Layout 4.2
Purpose
To realize the display of the decoded video on the video wall, you must set the Video Wall
Configuration first so as to link the video output with video wall.
Click Video Wall Configuration to enter the corresponding interface. Step 1
Video Wall Configuration Figure 4-33
You can use the default video wall layout or click to add a new layout. Input the number Step 2
of screens in row and column and up to 16 × 20 split screens are available.
Screen Layout Configuration Figure 4-34
Click OK to finish the adding of the video wall information. Step 3
Drag the output channels from the left-side list to the display screen. Step 4
Move the cursor to the window, and the icon automatically appears in the upper-right Step 5
comer of the window. Click to close the window.