User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
25
Stream Configuration Interface Figure 4-21
Check the check box of Auto-Switch Stream Type to enable auto switch between main Step 2
stream and sub-stream.
Click Save button to save the settings. Step 3
When a screen is split into more than 16 windows, the main stream will automatically switch to
sub-stream to lower the bandwidth.
Configuring Transparent Channel 4.1.8
Purpose
The Transparent Channel refers to the transmission channel used for forwarding data between the
decoder and the encoder without operating on the data.
Click Configuration > Decoding Configuration > Transparent Channel to enter transparent Step 1
channel settings interface.
Transparent Channel Interface Figure 4-22
Select a transparent channel from the list to configure. Step 2
Click Modify to modify the parameters of the selected transparent channel. Step 3