User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
24
8 to 63 ASCII characters or 8 to 64 hexadecimal characters are allowed.
WPA2-Personal
Refer to the configuration of WPA-Personal for reference.
Click Save button to save the settings and the following note window pops up. Click OK to Step 6
reboot the device and enter the Wi-Fi mode.
Note (1) Figure 4-19
(Optional) Uncheck the checkbox of Enable Wi-Fi and click Save to save the settings. The Step 7
following note window pops up. Click OK to reboot the device and exit from the Wi-Fi mode.
Note (2) Figure 4-20
If wired network cable is connected to the device when the Wi-Fi is enabled, wired network
will be connected by priority. But the decoding capability will conform to the configuration in
the Wi-Fi mode.
In Wi-Fi mode, up to 16 channels can be decoded with up to 1080p resolution of each channel
and the maximum bandwidth is 64 Mbps.
Configuring Stream Settings 4.1.7
Purpose
The stream configuration refers to the auto stream switch between main stream and sub-stream.
Click Configuration > Decoding Configuration > Stream Configuration to enter stream Step 1
configuration interface.