User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
21
If a new alias of the device domain name is defined in the decoder, it will replace the old one
registered on the server.
3. Click Save to save the settings.
HiDDNS Settings Figure 4-14
After having successfully registered the device on the HiDDNS server, you can access your device
via Web browser or client software with the Device Domain Name (device name).
Configuring Wi-Fi Settings 4.1.6
Purpose
The Wi-Fi can be used as the supplement of the wired network. You can get stream and decode the
video on the video wall when Wi-Fi is enabled if no wired network can be accessed.
Click Configuration > Network > Wi-Fi to enter the Wi-Fi Settings interface. Step 1