User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
8
Getting Started Chapter 3
Purpose
You are required to activate the decoder first by setting a strong password for it before you can use
the device. And you can configure the basic network parameters.
Activation via Web Browser and Client Software are all supported.
For the first-time user, the default user name of DS-6900UDI is admin, and the default IP address is
192.0.0.64.
Activating via SADP Software 3.1
SADP software is used for detecting the online device, activating the camera, and resetting the
password.
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts. Follow the steps to activate the camera.
Run the SADP software to search the online devices. Step 1
Check the device status from the device list, and select the inactive device. Step 2
SADP Interface Figure 3-1
Create a password and input it in the password field, and confirm the password. Step 3
Click Activate to activate the device. Step 4