User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
41
Dragging the Channel to the Video Wall
Drag the channel from the left side list to realize the decoding in the selected window. You Step 1
can also drag an area file to the video wall to decode the added encoding devices in the area
file on the video wall.
You cannot drag an area file to the video wall across the LCD and LED outputs.
If there are more than 3 encoding devices in an area, when you drag the area file to the
video wall, the note pops up to remind you that no more window can be opened or the
total area of layers in single-screen has reached the limit. Only the first 3 encoding
devices in the area file can be decoded on the video wall.
Decode the Video on the Wall Figure 4-54
Select one decoding window and click to set the decoding screen layout with Step 2
1/4/6/8/9/12/16/25/36 window division modes are available.
Window Division Figure 4-55
Right click the selected window and the following interface pops up. Step 3