User Manual

HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
27
Enable Synchronous Output Figure 4-25
Click OK to confirm the settings. Step 3
Configuring Personalized Settings 4.1.10
Purpose
You can set the stopped decoding image and failed streaming image for the personalized
configuration.
Click Configuration > Decoding Configuration > Personalized Configuration to enter the Step 1
personalized configuration interface.
Personalized Configuration Figure 4-26
Select Blank Screen or Last Frame when decoding ends. If you select Blank Screen, the Step 2
screen will change blank when the decoding ends. If you select Last Frame, the screen will
show the last frame when the decoding ends.
Select No Network Signal or Last Frame when streaming fails. If you select No Network Step 3
Signal, there shows no network signal when streaming fails. If you select Last Frame, the
screen will show the last frame when streaming fails.
Click Save to save the settings. Step 4
Managing User Account 4.1.11
Purpose
The user accounts can be managed on this interface.
Click Configuration > System > User Management to enter the user management interface. Step 1