User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Panels and Connections
- Chapter 3 Getting Started
- Chapter 4 Decoder Configuration and Operation by Web Browser
- 4.1 Decoder Configuration
- 4.1.1 Checking Device Information
- 4.1.2 Configuring Time Settings
- 4.1.3 Configuring RS-485/RS-232 Serial Port
- 4.1.4 Configuring Basic Network Settings
- 4.1.5 Configuring DDNS Settings
- 4.1.6 Configuring Wi-Fi Settings
- 4.1.7 Configuring Stream Settings
- 4.1.8 Configuring Transparent Channel
- 4.1.9 Configuring Synchronous Output Settings
- 4.1.10 Configuring Personalized Settings
- 4.1.11 Managing User Account
- 4.1.12 Importing/Exporting Configuration Files
- 4.1.13 Maintenance
- 4.2 Setting Video Wall Layout
- 4.3 Configuring Decoding Output
- 4.4 Decoding Operation
- 4.1 Decoder Configuration
- Chapter 5 Decoder Configuration and Operation by Client Software
- Chapter 6 Display via Wi-Fi Connection
- Chapter 7 Appendix
HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
20
For the IP Server, you have to apply a static IP, subnet mask, gateway and primary DNS from the
ISP. The Server Address should be entered with the static IP address of the PC that runs IP Server
software.
IPServer Settings Figure 4-12
PeanutHull
1. Enter User Name and Password obtained from the PeanutHull website.
2. Click Save to save the settings.
PeanutHull Settings Figure 4-13
HiDDNS
1. Enter the Server Address of the HiDDNS server: www.hik-online.com.
2. Enter the Domain Name of the device. You can register the alias of the device domain
name in the HiDDNS server first and then enter the alias to the domain name in the
decoder; you can also enter the domain name directly on the decoder to create a new one.