User Manual

HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
19
Set the network parameters, including the NIC, IP Address, Subnet Mask, Gateway, and DNS Step 2
Server.
The DS-6904/6908/6910/6912/6916UDI provides multiple NICs for selection.
Click Save to save the settings. Step 3
Configuring DDNS Settings 4.1.5
Purpose
If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS
(DDNS) to be used for network access.
Prior registration with your DDNS Provider is required before configuring the system to use DDNS.
Click Configuration > Network > DDNS to enter the DDNS Settings interface. Step 1
Check the Enable DDNS checkbox to enable this function. Step 2
Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, Step 3
HiDDNS and NO-IP.
 DynDNS
1. Enter Server Address for DynDNS (e.g., members.dyndns.org).
2. Enter the User Name and Password registered in the DynDNS website.
3. In the Domain text field, enter the domain obtained from the DynDNS website.
4. Click Save to save the settings.
DynDNS Settings Figure 4-11
 IPServer
1. Enter server address for IPServer.
2. Click Save to save the settings.