User Manual

DS-6700HQHI-SATA Series Encoder User Manual
71
Figure 10. 3 Maintenance Page
10.3.1 Restarting the Device
On the Maintenance> Reboot interface, click Reboot to enter the following message box:
Figure 10. 4 Reboot the Device
Click OK to reboot the device or Cancel to cancel the operation.
10.3.2 Restoring Default Settings
On the Maintenance > Default interface, click Restore or Default to restore device parameters to the factory
settings.
Figure 10. 5 Restore Default Settings
By selecting the Restore button, the device restores the default settings for the parameters except the IP