User Manual

DS-6700HQHI-SATA Series Encoder User Manual
57
6.3.7 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address conflict, illegal access, video
standard mismatch, video signal exception, record/capture exception and video resolution mismatch.
When the selected resolution under Remote Configuration > Camera Settings >Video Settings and the actual
video input resolution are mismatched, the exception alarm will occur. Please refer to Section Configuring Video
Settings.
Steps:
1. Click Remote Configuration > Alarm Settings > Exception to enter the Exception Settings interface.
2. Check the checkbox to set the actions taken for the Exception alarm. Please refer to Step 3 Set the Alarm
Actions Taken for Motion Detection in Section Configuring Motion Detection.
Figure 6. 22 Handling Exceptions
3. Click Save to save the settings.
6.4 Configuring Privacy Mask
Purpose:
Privacy Mask enables you to cover certain areas on the video of the channel to prevent your privacy from live
viewing and recording.
Steps:
1. Click Configuration>Remote Configuration>Camera Settings>Privacy Mask to enter the privacy mask
settings interface.
2. Select the camera to configure privacy mask.
3. Check the checkbox of Enable Privacy Mask to enable this function.