User Manual

DS-6700HQHI-SATA Series Encoder User Manual
49
Figure 6. 9 Motion Detection Settings
(4) You can check the checkbox of Enable Dynamic Analysis for Motion. When this feature is enabled, the
motion detection triggered frame (green) for the moving targets in the motion detection area will be
displayed on the live video.
(5) Click the button. Draw motion detection area by clicking and dragging the mouse in the
live video image.
By default, the full screen motion detection is configured.
(6) Click the button to finish drawing.
You can click the button to clear all areas.
(7) Move the slide bar to set the camera’s sensitivity.