User Manual

DS-6700HQHI-SATA Series Encoder User Manual
48
Video Encoding: Select the video encoding standard.
When the MJPEG video encoding standard is selected, the frame rate can be set to 1~15fps and the max.
bitrate is not configurable.
5. If you want to copy the display settings of the current camera to other cameras, spread the Copy to Camera
panel and select the camera(s) to copy, or click Select All to select all cameras.
Figure 6. 8 Copy to Camera
6. Click OK to validate the above settings.
6.3 Configuring and Handling Alarms
Purpose:
This section explains how to configure the network camera to respond to alarm events, including Motion Detection,
External Alarm Input, Video Loss, Tamper-proof and Exception. And the alarm events can trigger the alarm actions,
such as Notify Surveillance Center, Send Email and Trigger Alarm Output.
6.3.3 Configuring Motion Detection
Motion detection is a feature which can alert the personnel and record the video for the motion occurred in the
surveillance scene.
Steps:
1. Set the Motion Detection Area
Steps:
(1) Click Remote Configuration> Camera Settings> Motion Detection to enter the motion detection
settings interface.
(2) Select the camera to configure the motion detection.
(3) Check the checkbox of Enable Motion Detection.