User Manual

DS-6700HQHI-SATA Series Encoder User Manual

Figure 5. 18 Email Settings (2)

4. Click Save to save the Email settings.

Please refer to the following sections for more information:

Configure alarm linking methods with Send Email on Section Configuring Motion Detection, Section Configuring

External Alarm Input, Section Configuring Video Loss Alarm, Section Configuring Video Tempering

Alarm

and

Section Handling Exception.

5.3.6 Adding Network Disk

For the models with SATA disks connected, the configuration of network disk is selectable.

Before you start:

1. The network storage device is available within the network and is properly connected.

2. The network storage device is configured with NAS or IP SAN mode (please refer to the User Manual of IP

SAN/NAS).

Steps:

1. Click Remote Configuration > Network Settings >NetHDD to enter the NetHDD settings interface.

Figure 5. 19 Search Network Disk

2. You can search the available NAS/IP SAN disks in the designated storage sever by entering its IP address.

1) Select the type to NAS or IP SAN, as shown in Figure 5.19.