User Manual

DS-6700HQHI-SATA Series Encoder User Manual
33
For the IP Server, You have to apply a static IP, subnet mask, gateway and primary DNS from the ISP. The
Server IP should be entered with the static IP address of the PC that runs IPServer software.
Figure 5. 13 IPServer Settings
PeanutHull:
(1) Enter User Name and Password obtained from the PeanutHull website.
(2) Click Save to save the settings.
Figure 5. 14 PeanutHull Settings
HiDDNS:
(1) Enter the Server Address of the HiDDNS server: www.hiddns.com.
(2) Enter the Domain name of the device. You can register the alias of the device domain name in the
HiDDNS server first and then enter the alias to the domain name in the encoder; you can also enter
the domain name directly on the encoder to create a new one.
If a new alias of the device domain name is defined in the encoder, it will replace the old one
registered on the server.
(3) Click Save to save the settings.
Figure 5. 15 HiDDNS Settings