Manualshelf

User Manual

ManualsBrandsHikvision ManualsEncoders8-Channel Video Encoder, H.264, Dual Stream
31323334353637383940
DS-6700HQHI-SATA Series Encoder User Manual
30
page.
Steps:
1. Click Remote Configuration> Device Parameters> Advanced to enter the advanced settings interface.
Figure 5. 7 Packet Time of Recording
2. Set the packet time of the recorded file.
The packet time can be set from 1to 300 minutes.
3. Click Save to save the settings.
5.3 Network Settings
5.3.1 Configuring TCP/IP Settings
Network settings must be properly configured before operating device over network.
Steps:
1.
Click
Remote Configuration > Network Settings > TCP/IP to enter the TCP/IP Settings interface:
Figure 5. 8 TCP/IP Settings
2.
Configure the NIC settings, including the NIC Type, IPv4 Address, IPv4 Subnet Mask, IPv4 Default
Gateway, and MTU setti
ngs.