User Manual

DS-6700HQHI-SATA Series Encoder User Manual

NTP Port: Port of NTP server.

Interval: The time interval between the two synchronizing actions with NTP server. It can be set from 1 to 10080

minutes.

Figure 5. 4

Time Sync by NTP Server

If the device is connected to a public network, you should use a NTP server that has a time synchronization

function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the device is set up in a

more customized network, NTP software can be used to establish a NTP server used for time synchronization.

 Configuring Time Synchronization Manually

Enable the Manual Time Sync function and then click the icon to set the system time from the pop-up

calendar. You can click the

icon to quickly select the time.

Figure 5. 5 Manual Time Sync

You can also check the checkbox of Sync. with computer time to synchronize the time with the local PC.

 Click the DST tab page to enable the DST function and set the date of the DST period.

Figure 5. 6 DST Settings

4. Click the Save button to save the settings.

5.2.2 Configuring Packet Time of Recording

The recorded file is packed in 1G by default. You can also customize the packet time in the advanced settings