User Manual

DS-6700HQHI-SATA Series Encoder User Manual

Figure 4. 8 PTZ Linking

Please refer to Chapter Configuring and Handling Alarms for the PTZ Linking settings (Remote

Configuration>Alarm Settings>Alarm Input>Linkage Method).

4.3.5 Setting/Calling a Patrol

Setting a Patrol:

1. In live view mode, click the

from the PTZ control area to enter the patrol settings interface.

2. Select a patrol number from the patrol list for setting.

Figure 4. 9 Patrol Setting

3. Click the button to enter the Add Patrol Path interface.

Figure 4. 10 Add Patrol Path

4. Configure patrol parameters, including the preset No., duration of staying for one preset and speed of patrol.

Preset: determines the order at which the PTZ will follow while cycling through the patrol.

Patrol Duration: refers to the time span to stay at the corresponding key point. The duration can be set from

1 to 30 sec.

Patrol Speed: defines the speed at which the PTZ will move from one key point to the next. The speed can

be set from 1 to 40.