User Manual

DS-6700HQHI-SATA Series Encoder User Manual
16
Chapter 3 Access to DS-6700HQHI-SATA
by WEB Browser
The DS-6700HQHI-SATA can also be accessed by WEB Browser for configuration and operation. The supported
WEB browsers include: Internet Explorer 6/7/8/9, Firefox 3.5 and above, Chrome 8 and above, Safari 5.0.2 and
above, Windows XP SP1 and above (32-bit).
Before you start:
 Before access, you need to configure the network settings of device according to Chapter 3.
 Connect the device to the LAN, and prepare a PC connected to the same LAN with the device.
 The factory default IP address of the device is 192.0.0.64.
3.1 Installing Web Components
Steps:
1. Open WEB browser, input the IP address of DS-6700HQHI-SATA (e.g., http://192.0.0.64) and then press the
Enter key on PC. The system will display the login interface.
When the HTTPS feature is enabled, the system uses the HTTPS login mode (e.g., https://192.0.0.64) by default.
You can also input http://IP address/index.asp (e.g., http://192.0.0.64/index.asp) if you want to use HTTP mode to
log into the device.
Figure 3. 1 Login Page
Input the user name and the password to log into the system.
In the Login dialog box, if you have entered the wrong password for 7 times for the admin user or 5 times for the