User Manual

DS-6700HQHI-SATA Series Encoder User Manual
11
selected to NO or NC. Different alarm output connection methods are applied to the AC or DC load. Please refer to
the following diagram:
Alarm output connections diagram:
Figure 1. 6 Alarm Output Connections
Please note the different connections of JJ1 shown above.
For DC load, JJ1can be safely used both in NC and NO methods, and it is recommended to use within the limit of
12V/1A. For external AC input, JJ1 must be open. The motherboard provides two jumpers, each corresponding to
one alarm output. And both of two jumpers are factory set to be connected.